Thread: no current over coil
Results 1 to 10 of 10
Threaded View
-
05-17-2008 05:09 AM #5
Take a plug wire and stick it in the coil tower,put a plug in the wire and lay it on the block so the threads are grounded. Now turn the key on and off,if the coil is good you'll get a spark every time. This being so,your ignition fault is in the distributor. If your alternater is putting out 19v,you've got a bad regulator. Hope this helps you,Hank





LinkBack URL
About LinkBacks
Reply With Quote
Either return this forum to what was or get the HELL OUT!
Dead!