Thanks for the info. I intended to burp the engine, but when I went out to do so, it would not start. My guess is that the module in the distributor is bad, in that there is power to a new coil, but no spark...

I do have another question concerning three dueces. The set I have, only has idle mixture screws on the center carb, the 1st and 3rd, are sealed off, thus the engine only idles on the center carb. Someone has told me the reason I'm also having a problem getting the car to idle well, is that all three carbs should have idle mixture adjustments, in that a 350 will not idle off only one carb???? Any ideas? Seems the carb sets I seen advertised come with the 1st and 3rd carbs sealed off.... thanks for the help - kip