Thread: Killer street/strip 406 ci
Threaded View
-
03-09-2008 11:52 PM #1
Killer street/strip 406 ci
ok hp/tq gurus! Im building a 406 ci sbc stage II block from j&r motorsports with 4340 forged crank, 4340 forged H beam rods, and wiseco forged flattop pistons running 10:1 compression. AFR 195 street eliminator heads, edelbrock RMP Air Gap intake, Holley 750 HP street carb, 1 3/4" headers, 1.6 roller rockers, and either Comp Cams hydraulic roller XE288HR-10 (.52 int/.54 exh lift , 236 int /242 ehx duration @.50) or Comp Cams hyd roller XE294HR-10 (.54 int/.562 exh lift, 242 int/248 exh duration @ .50) AFR claims about 515 hp/530 ftlb and recommends the 195 heads over the bigger (what i thought better) 210 heads. What hp/tq numbers do you think this monster will pull? Also which cam would you recommend? The 406 will be dropped in a weekday driver, weekend stripper 70 Nova (3500lb, 3.31 gears, M20 transmission) Any 1/4 mile E.T. guesses would be great too (@3500 ft above sea level)
Thanks!!!! Eric!Supernova!
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel