Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Thumpy Idle
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 25
  1. #1
    dhemi1's Avatar
    dhemi1 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2007
    Location
    Brownsville
    Car Year, Make, Model: 2006 Nissan Titan, 2007 Traxxas T-MAXX
    Posts
    113

    Thumpy Idle

     



    Hi guys/gals!

    Camshafts are still a bit of a mystery to me.

    About what duration do cams make a engine thumpy at idle/poor vaccum?

    Is there a general formula/guide I can follow?
    Is camshaft duration porportional to vaccum loss?

    In a nutshell, what I am asking is, for a street engine how much duration is too much? Or does it come with years of engine building like you guys have?

    lol i'm all questions,
    thanks in advance,
    -CJP
    Carry On My Wayward Son

  2. #2
    tango's Avatar
    tango is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2007
    Location
    Chicago
    Posts
    1,354

    I would say on a SB Chevy 218 at .050 and up 450 Lift and up . You can hear the cam from there-up and start to drop Vaccum .

  3. #3
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    a well built engine is usually planned around the cam .. the cam is the heart
    iv`e used up all my sick days at work .. can i call in dead ?

  4. #4
    HemiTCoupe's Avatar
    HemiTCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    Deer Lodge
    Car Year, Make, Model: '27 T Coupe
    Posts
    793

    The cam in my El Camino is 276/286 at .0045", 221/230 at .050", .454"/.454" valve lift, and 110 LSA, and is best with 9.0-10.5 compression to 6000 rpm's (a low end cam) It has lots of lop, and pulls 16lbs of vacuum, power brakes work normal, the more duration the more compression that bleeds off, which I wanted to do with my 58cc heads, so that I could use 87 octane gas. It never knocked with 87, even when it was 100 degs out

    Pat
    HemiTCoupe



    Anyone can cut one up, but! only some can put it back together looking cool!
    Steel is real, anyone can get a glass one.


    Pro Street Full Fendered '27 Ford T Coupe -392 Hemi with Electornic Hilborn injection
    1927 Ford T Tudor Sedan -CPI Vortec 4.3
    '90 S-15 GMC pick up

  5. #5
    tango's Avatar
    tango is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2007
    Location
    Chicago
    Posts
    1,354

    That was a good idea with that camshaft pick . With the cost of gas this is a good way to still run an engine with high C/R . with out having to change heads or pistons . I had a 1969 Pontiac 400 that was way up on the C/R I did the same thing . COOL

  6. #6
    gassersgarage is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    Torrance
    Car Year, Make, Model: 31 Ford Model A
    Posts
    84

    Depends on cubic inches too. The smaller the engine, the more radical the cam will sound. For example, the old Duntov cam in a 350 will sound pretty mild. In a 283, it will sound pretty radical.

    Get a P.A.W. catalog (Performance Parts Warehouse). They carry everything, including cams from different manufacturers. They will list the applications for each cam profile and what you will need to reap the benefits. (ie: cubics, compression, convertor, gears, etc...)

  7. #7
    Racecar100 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    Lawrenceburg
    Car Year, Make, Model: 1940 Ford Coupe
    Posts
    139

    You can make any cams to have thumpy idle is by closing down the lobe center line down to smaller number...

  8. #8
    dhemi1's Avatar
    dhemi1 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2007
    Location
    Brownsville
    Car Year, Make, Model: 2006 Nissan Titan, 2007 Traxxas T-MAXX
    Posts
    113

    I am definitely writing this info down!

    276/286 at .0045", 221/230 at .050", .454"/.454" valve lift, and 110 LSA
    Now that is a torqey/low range cam. How did you come the conclusion of using that camshaft HemiTCoupe? Street/daily drive El-Camino?

    -CJP
    Carry On My Wayward Son

  9. #9
    HemiTCoupe's Avatar
    HemiTCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    Deer Lodge
    Car Year, Make, Model: '27 T Coupe
    Posts
    793

    Quote Originally Posted by dhemi1
    I am definitely writing this info down!

    276/286 at .0045", 221/230 at .050", .454"/.454" valve lift, and 110 LSA
    Now that is a torqey/low range cam. How did you come the conclusion of using that camshaft HemiTCoupe? Street/daily drive El-Camino?

    -CJP
    I put the motor together back in '94, I had it for my '37 chevy pickup, that I sold with the mock up motor in it, it had sat in the corner on a stand wraped up, I put it in my El Camino 3yrs ago.
    I wanted a motor with lots of lop and not a lot of lift so that I could use 87 octane, this is the one I wanted, it does have lop, it also worked with out changing the TQ, I drove it everyday for 2 1/2yrs (I sold it), I pulled more weight than I should have at times, it had lots of low end pull.

    I talked to Harold , (He's always on the forums at Team Chevelle) He was the designer of the cams & owner of Ultra Dyne cams , then Lunati bought him out and he has been designing cams for yrs there, he makes alot of the factory stock & hp cams.
    I lost the papers on my cam and I just told him the number on it, and he wrote this back to me : (In another thread he said it's good in a 350/383/400 , and in a 283/305/307 use a different cam)



    #1 Aug 15th, 05, 10:25 PM
    HemiTCoupe
    Tech Team Join Date: Jun 2005
    Location: Maplewood, Mn.
    Posts: 41


    UDHarold "E8239"

    --------------------------------------------------------------------------------

    I bought one of your cams about 10 years ago, and I lost the papers and I don't remember anything about it.
    On the end of the cam it says "E8239" stamped on the gear end along with 276-286-H10 and "UD"
    I have it in a 406 with dished pistons, 60cc 202/1.6 heads, early 80's spread bore intake, Q-Jet, headers. stock torque converter with a 350 tranny.
    Could you please tell me if it's good for low end or mid range. How it should idle. lift duration. or even if it's good for this motor or not!

    Thanks Pat
    __________________
    HemiTCoupe

    Pro Street Full Fendered '27 Ford T Coupe -392 Hemi with Hilborn injection
    '27 Ford T Tudor Sedan -V-6
    '68 El Camino 406
    '87 Mustang GT convert -302
    Trike Shop -VW Trike -1835
    '93 S-10 4X4 Blazer (Hey! it snows here)


    #2 Aug 15th, 05, 11:50 PM
    UDHarold
    Senior Tech Team Join Date: Oct 2002
    Location: Senatobia, MS, USA
    Posts: 1,467


    Re: UDHarold "E8239"

    --------------------------------------------------------------------------------

    Sure.....

    Your cam is 276/286 at .0045", 221/230 at .050", .454"/.454" valve lift, and 110 LSA.
    Yours is the 58239th cam that UltraDyne ground.
    It should be in the engine on a 104° to 106° ATDC ICL--ie, 4 to 6 degrees advanced. It should work with anything between 9:1 to 10.5:1. Power in a 406 should be from just off idle to 6000, with peak around 5200. Idle should be around 750, and there should be enough vacuum to work power brakes. I still make this cam, only on 112 LSA.
    It's a good one.....

    UDHarold


    another guy asked him :


    Jun 7th, 05, 08:57 PM
    blue66 Join Date: Jun 2005
    Location: WI
    Posts: 19


    UDharold cam reco

    --------------------------------------------------------------------------------

    I have a friend who is looking to change cams in his 406sbc, it is basically a driver but he is looking to have a nice lopey idle like my bbc solid roller but stay hydraulic and not change springs, rockers etc.
    Anything out there that will make him happy?
    its basically a stock 406, dual plane alum. intake, 4 barrel carb.
    Thanks, BRian



    #2 Jun 7th, 05, 10:09 PM
    UDHarold
    Senior Tech Team Join Date: Oct 2002
    Location: Senatobia, MS, USA
    Posts: 1,467


    Re: UDharold cam reco

    --------------------------------------------------------------------------------

    Brian,

    Not changing springs, I'd use either the VooDoo 262, with 219/227 at .050 and .468/.489 valve lift, or one of my older Lunati grinds, like the 301A5LUN, 272 at the seat, 217 at .050, .454 valve lift, 112 LSA, lots of vacuum, very long street life. or the 301A6LUN, 276 at the seat, 221 at .050, .454 valve lift, and 110 LSA, lopier idle, enough vacuum for brakes. I also have a 301A8LUN, 221/230 at .050, still .454/.454 valve lift and 112 LSA, that works power brakes.
    All of the .454 lift hydraulics have a long history of long life on the streets, many over 100,000 miles. MY daughter used the 276 as an exhaust lobe in her 383, and it went 8 years on one set of springs, rockers, and lifters.
    Tell me more about the engine and car and we can narrow it down.....

    UDHarold



    Harold is a nice guy and will answer any cam question, and not only about the cams he works with!!!



    I'm no expert in camshaft theory, but I think a simple way to think of it is how many degrees of camshaft rotation there are between the midpoint of the exhaust valve lift and the intake valve lift. 110* is very common with a mild SBC cam. Assume that is a standard and all else is kept equal, 108* degrees would increase the amount valve overlap (ie. amount of time both valves are open at the same time) reducing lower rpm cylinder pressure and raising the rpm powerband of the motor. 112* has the opposite effect and would serve to build more low rpm cylinder pressure and lower the rpm powerband of the motor.

    RPM range is also affected by the duration of the valve event (ie. 280* of duration will have a higher rpm range than 260*).

    My .02 Worth!

    Pat
    HemiTCoupe



    Anyone can cut one up, but! only some can put it back together looking cool!
    Steel is real, anyone can get a glass one.


    Pro Street Full Fendered '27 Ford T Coupe -392 Hemi with Electornic Hilborn injection
    1927 Ford T Tudor Sedan -CPI Vortec 4.3
    '90 S-15 GMC pick up

  10. #10
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by Racecar100
    You can make any cams to have thumpy idle is by closing down the lobe center line down to smaller number...
    This will really make the engine have a thumpy idle.
    I would also favor the exhaust by 10 degree's.
    In other words try and find a cam that is ground on a 106 L/S.

  11. #11
    bluestang67's Avatar
    bluestang67 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    New Lenox
    Car Year, Make, Model: 67 Mstg cpe , 37 Ford Coupe
    Posts
    2,787

    dHemi i too was looking and Denny found this one for me . Top link is the Comp Cam specs which are mild but this cam sounds great in the Vette in the second link. Just hit replay at you tube



    http://www.compcams.com/Technical/Se...umber=35-218-3


    http://www.youtube.com/watch?v=RJ_5NMiDJNA
    Last edited by bluestang67; 01-26-2008 at 06:32 AM.

  12. #12
    ponchogeezer is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    baltimore
    Car Year, Make, Model: 85 pont. fiero convertable
    Posts
    40

    I know,,, THIS damn v6 guy again,but this is the kinda question I'm asking.SINCE 90 DEGREE V6have different spacing than 8s ,how do I figure my cam specs to get the low end feel of big inches and still get good hp.to the 5500 rpm of these 262's ?Is there a way for v6ers to have as much gun as yiou aters? you know, sound and lope,thanks for lisyening phil the geezer

  13. #13
    SBC's Avatar
    SBC
    SBC is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2004
    Location
    Magnolia
    Car Year, Make, Model: 69 Chevy Nova 283 4-spd
    Posts
    443

    To reiterate some of what has already been said . . .
    The last line kind of sums it all up.

    This from http://www.superchevy.com/technical/...cam/index.html

    LOBE SEPARATION ANGLE
    By choosing a cam with the correct LSA for the engine's intended usage, you can have your cake and eat it too. First of all, the LSA is ground into the cam at the factory and cannot be changed without regrinding the cam. It represents the number of degrees, in crankshaft rotation, that separate the intake lobe centerlines from the exhaust lobe centerlines. A wider LSA figure, i.e. 112-116 degrees, moves the lobe centerlines further apart and will smooth your idle due to the decrease in overlap that it creates. The lower the figure, i.e. 106-110 degrees, moves the centerlines closer and will increase bottom end power, but your idle will suffer along with it. I did a test a few years back running five different LSAs on otherwise identical cams in the same engine. What I found was that the cams with a 108-110 LSA worked best all around. But idle vacuum was higher with the wider LSA cams (112-114) and this would translate to better idle quality. Bottom line here is that most cam companies have put lots of effort into selecting the proper LSA for the cam's intended usage so you'd be wise not to second-guess them.
    There is no limit to what a man can do . . . if he doesn't mind who gets the credit. (Ronald Reagan)

  14. #14
    Yellow72's Avatar
    Yellow72 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2002
    Location
    cincinnati
    Car Year, Make, Model: 6-71 blown smallblock '72 corvette
    Posts
    136

    Quote Originally Posted by bluestang67
    dHemi i too was looking and Denny found this one for me . Top link is the Comp Cam specs which are mild but this cam sounds great in the Vette in the second link.
    Nah that's not a cam...here's a CAM!
    Crank up your sound, it's worth it...

    http://videos.streetfire.net/search/...5f014a00e4.htm

  15. #15
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    def a good sound .. should have put down a little water though .. thats a good site for the younger guys ..
    iv`e used up all my sick days at work .. can i call in dead ?

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink