Thread: Street/strip Sb 350 Build Up

Tweet

I was thinking of using a set of Vortec heads . They are between $475 and $650 . Or a set of World S/R Torquers I can buy the bare ones and assemble them myself . I also have a set of good #186 Fuelle heads 194/150 64CC that I might pin the studs and use . If I use the Fuelle heads then I cans spend more on the camshaft and intake set up . What camshaft and intake do you have in mind ?

Originally Posted by tango

I was thinking of using a set of Vortec heads . They are between $475 and $650 . Or a set of World S/R Torquers I can buy the bare ones and assemble them myself . I also have a set of good #186 Fuelle heads 194/150 64CC that I might pin the studs and use . If I use the Fuelle heads then I cans spend more on the camshaft and intake set up . What camshaft and intake do you have in mind ?

I would look at the Dart Iron Eagle S/S heads.
Comp. Products had them bare for $460.
Assembled where $625.
I would look at cams that are at 230@.050 on the intake side and 236 to 240 on the exhaust side more for the N20.
To run a cam this size you will need to have a 9.5 to 10 to 1 comp. ratio.
I would go 108 -110 L/S or 112-114 L/S if you want to use the spray.