Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Chevy mystery on cam change
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    18436572's Avatar
    18436572 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Granbury
    Car Year, Make, Model: 68 Chop top
    Posts
    147

    Chevy mystery on cam change

     



    I am in the process of changing out my camshaft as discussed on a couple of threads on this site. Before I opened anything, I placed the engine at the #1 TDC on the crank and verified this with the distributor rotor pointing at the #1 spark plug wire. When I opened the timing chain cover, to my SURPRISE the timing marks were NOT facing each other. The cam mark was at 12 clock and the crank was at 12 clock. Every time I have changed gears and chain, the instructions always state to move the engine so that the cam is at the 6 clock position and the crank is at 12. Is this just for ease of installation and the engine is ACTUALLY at the #6 TDC?
    If this is true, there aught to be WARNING LABELS!!!
    This would explain numerous builds where I had to rotate the distributor 180 to get it to run. I was so embarrassed.
    If this is NOT true, I am in serious trouble. The engine ran fine for 36,000 mile like this AND I changed out the cam and put it back just like I found it. Both cam and crank at 12 clock. Do I need a tear down?
    I am only writing this thread for clarification to all of us casual gear heads.

  2. #2
    shawnlee28's Avatar
    shawnlee28 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    so.cal
    Car Year, Make, Model: 66 c 10 fleetside longbed
    Posts
    1,942

    Dot to dot ,cam at 6 crank at 12. This puts ,....no 6 I think at tdc.
    Cam at 12 and crank at 12 puts the no 1 at tdc.
    Its gunna take longer than u thought and its gunna cost more too(plan ahead!)

  3. #3
    18436572's Avatar
    18436572 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Granbury
    Car Year, Make, Model: 68 Chop top
    Posts
    147

    thanks shawnlee
    I got it running
    I had to do a cam break in so when it fired I ran it
    missed the dist gear one tooth so it was really retarded but I got the run in
    Properly timed, it runs fine thanks for the reply
    I repeat; "When changing cam gears and timing chain"
    Dot to dot, cam at 6 crank at 12. This puts the engine at no 6 at tdc.
    Cam at 12 and crank at 12 puts the no 1 at tdc.
    I learned something new today!
    I think I will get cleaned up and enjoy some cold beverages.

  4. #4
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    Manufacturers following GM's guidelines "assumed" or filled out the contract with the attitude that the running engine with nothing being changed ( such as broke down on the side of the road or no distributor removal, etc), well, it doesn't matter. I have spent many years wondering why (not too intensely), but it doesn't matter since the answer has been given and viewers know that it has been corrected. Good job Shawn, you got him going.
    What if the "Hokey Pokey" is what it's really all about?

  5. #5
    Racecar100 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    Lawrenceburg
    Car Year, Make, Model: 1940 Ford Coupe
    Posts
    139

    That Right Dot to dot #6 is at TDC and #1 at over lap.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink