-
11-08-2007 05:53 PM #1
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-08-2007 06:31 PM #2
Originally Posted by 63BoxNova
-
11-08-2007 09:05 PM #3
Well, I took the grinder and made some clearance for the chain, problem solved. Put it all together and noticed there is NO slack in the chain at all, the chain feels really tight, in fact maybe too tight. Is this is normal? Im wondering if this is just the way double rollers are, or if there should be atleast a little bit of slack? Perhaps it will loosen up after being run for a while?
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Wiring can be a pain. My problem is I get in a groove and have a plan and then get sidelined to another project and when I come back I forget what the heck my plan was.
1940 Ford Tudor Build Thread