Okay, have my new heads! Now, some rookie ? to ask so I can try to get things done this weekend.
According to ARP I should use only their moly lube on on their head bolts. Is that absolutely all I can use or will just a good quality lube and thread sealer be allright? Also, they advise tourqing the bolts to 60 ft./lb with ARP lube but up to 85 ft./lb with 30w motor oil? Just who's torque settings should I go by? This is a sbc 350 - 1973 block- and are putting on new Dart Iron Eagle heads.
Gaskets are Mr. Gasket ultra-seal part # mrg-5800- should I use any sealer on them or install them dry? Thanks for any and all advice y'all can give my upgrading project.