Thread: MSD Ready to Run
Results 1 to 15 of 16
Threaded View
-
07-04-2007 07:50 AM #5
I retimed, 8 BTC hooked the vacum up to full. The motor performs much better. I checked to see if the carb pump shoots when the pump is moved and it does, Still has the flat spot, the only thing I have not checked is the fuel pressure, I will get a gauge and fittings and reply back with results.





LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!