350 exhaust manifolds

I want to use the rams horn style from a '68 350 on a '86 350 i have not seen yet , and also the short water pump. will these bolt onto the 86,also the 4 barrel intake?:whacked:

yes to all

So i should buy the running '86 and switch over my '68 frotn parts or buy the '67 running 283. the 86 is $500 and the '67 -283 is $600.
What would u do .Thanx in advance.
P.S. This is going in a 31 chevy rat:3dSMILE:

Quote:

---

Originally Posted by DennyW

You might want to measure the exhaust port bolt holes. If I'm not mistakin, the newer heads on the rear holes, are not in the same location.

---

the 87 350 I sold had 2 bolt holes on the rear exhaust port so it could take the normal 350 exhaust manifold which used the front bolt hole or the 305 style manifold which used the rear bolt hole. so I would bet yours has both also......joe