X-Rods

Printable View

05-20-2007, 01:19 PM
choffman41

X-Rods

I just found a box with some 350 rods in it with a "X" cast on the rod caps. Are these the well known x-rods, and if so, what's the advantage to them? Thanks.
05-20-2007, 01:28 PM
erik erikson

Quote:

Originally Posted by choffman41

I just found a box with some 350 rods in it with a "X" cast on the rod caps. Are these the well known x-rods, and if so, what's the advantage to them? Thanks.

They are just a heavier,stonger rod then some of the others.
Any of the lettered rods are o.k.
One thing to remember is by the time you re-size the big and small end,install good ARP bolts,polish the side beams and then send out to be shot peened you might as well buy a set of the after market rods.
05-20-2007, 01:34 PM
nitrowarrior

Good rod Chuck, O's second and B's next. X's do have a touch more durabilty, very similiar to the old "Pink" rods.
05-20-2007, 05:27 PM
69elko

I agree with Erik. They are good stock rods, but if you're planning on hitting high rpm's, aftermarket rods are the best bargain. The stock rod bolts won't hold up, and it'll cost just as much to change them, you can get some scat I-beam rods for like $250. ARP bolts already installed.