Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 383 Stroker Build
          
   
   

Results 1 to 13 of 13

Threaded View

  1. 05-03-2007 08:54 AM #8
    rumrumm's Avatar
    rumrumm
    rumrumm is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    Quote Originally Posted by FFM

    I have a combo in mind that I think should work very well. Here it is, let me know what you think.

    Holley 750 double pumper carb
    AFR 190cc street heads
    AFR FloPower RPM intake
    Comp Cams 280° Magnum hydraulic
    280° of duration
    230° of duration @ 0.050 in. lift
    0.480 in. lift
    1 3/4 headers
    MSD distributor
    9.5:1

    Thanks
    -FFM
    I built my 383 based on this combination except I used Edelbrock's RPM intake and 750 carb, and I am running one point more compression than you are (10.6:1). I would advise you to use the Edelbrock RPM or the RPM Airgap rather than the AFR intake if you are going to do much street driving. My engine dynoed at 450 hp and 467 ft. lbs. of torque. It really rocks in my deuce coupe!
    Last edited by rumrumm; 05-03-2007 at 08:57 AM.


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink