Hello there I have a 350 motor in my pickup that is almost dead. I have a 355 that i overhauled about 2 years ago that I had in my mud drag pickup for two races then went to a big block. The 355 has stock heads with flat top pistons I don't know the cr of it. The cam only pulls about 15 inches of vaccum. Don't know the specs of it. But anyways can I put this older 355 in this newer pickup with a tbi adapter for the spreadbore intake. I have to buy a different tbi anyways for this pickup the linkage is wore out in the tbi unit. Or should I just put a carb on it. what do you guys think.