new video of engine reving

[shawnlee28]

Here it is reving up a little,about 5000 rpm.........I think it sounds good for what it is.....305 .030 ,xe 262 cam,rhodes lifters,roller rockers,rams horns.

[thesals]

sounds pretty nice.... as denny said, could use some minor carb adjustments..... one thing i would reccomend though is even with a warm engine, you really should never bring it past 3500 rpms without a load.... when theres no load it brings risks of breaking things.... really if your engine is built tough enough it should be ok, but thats just what ASE tells us

[BigRedTrucker]

I'm staying "turned" for the burnouts.

[shawnlee28]

Sounds pretty darn nice. All I can hear wrong is the pump shot is slow.

Move it to the top hole or bottom hole for a bigger pump shot ?I have it in the middle now......also the video was in the hands of my brother...the engine was not quite warmed up.
Its no track racer /rice killer ...but I think I will enjoy.....

[shawnlee28]

I'm staying "turned" for the burnouts.

Gatta get the important things done first...like burnouts!!!!Then I can finish the body work.......I will not do too many burnouts once the body work is done.Too much risk of damage when the tire comes apart at 0 mph ground speed and it sayes 100 on the speedo
I have seen what they do at 65 when they seperate,...not pretty.I think a truck fares the worst on blow outs too,it pretty much tears em up.

[shawnlee28]

Thnx,Denny, once again...!!

[Chrislee13]

Move it to the top hole or bottom hole for a bigger pump shot ?I have it in the middle now......also the video was in the hands of my brother...the engine was not quite warmed up.
Its no track racer /rice killer ...but I think I will enjoy.....

yep the motor wasnt quite warmed up yet, also shawn mentioned the video lacked footage at Idle, i must confess it was my fault.
if anyone would like to hear it at idle just let me know, i still have about 5-7 minutes of video unseen.

[powerlord]

Hey shawnlee I pm'd ya