Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 305 SBC miss fire?
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    imnuts's Avatar
    imnuts is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Regina Beach
    Car Year, Make, Model: 37 plymouth 5 window Coupe
    Posts
    40

    305 SBC miss fire?

     



    hi guys maybe you can help me out?
    i have a 77 nova with a 305 4v automatic, it had a exhaust system that went from single into the muffler and out dual to each side of the car. Up until i changed out the exhaust to dual headers it seemed to run fine, now it sounds like it's missing on a cylinder, but when i checked the headers for heat all were equal. I check the plugs and all are nice and light brown, i also checked the timing which is ok. at idle it sort of chugs by sound only, meaning that you don't feel it when you are sitting in the car. I have checked all the plug wires as well. It doesn't or should i say hasn't back fired at all, just has a very annoying way of sounding, sort of like a school bus that runs on gas sort of chugging.
    anyone got any ideas before i start pulling it apart?

    thanks
    IMnuts

  2. #2
    drg84's Avatar
    drg84 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    Dansville
    Car Year, Make, Model: 1996 Aurora Autobahn edition
    Posts
    1,201

    Check for resistance on the cap/wires. May be a weak fire on the cylinder. Also look for vacuum leaks. Its possible that when you had the exhaust changed, you cracked a head when the factory bolts came out. This should be identifiable by a Compression test. If these dont turn up any results, pull the heads.
    Right engine, Wrong Wheels

  3. #3
    imnuts's Avatar
    imnuts is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Regina Beach
    Car Year, Make, Model: 37 plymouth 5 window Coupe
    Posts
    40

    thanks guys for the good suggestions. So far i have checked for header leaks and found none i have checked for any external vacuum leaks and found none as well. I have check all my plugs to make sure they are gapped right and all are a nice brown, i hate to say it but i'm thinking either the header tubes could either be the prob as they aren't exactly the same length or even a bad cam lobe. Any other ideas i couild check. When it's idling the engine has no shake to it at all at least not like if i pull a plug wire, and the exhuast sounds like a miss fire constantly but not like a popping sound more like a feathered popping almost as if there was an exhaust leak, and it's suck back sort of, if you know what i mean

    thanks
    IMnuts

  4. #4
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    Have you run a compression test?

  5. #5
    imnuts's Avatar
    imnuts is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Regina Beach
    Car Year, Make, Model: 37 plymouth 5 window Coupe
    Posts
    40

    no compression test as of yet, was going to dive into it on the weekend when i have more time

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink