Well here it is good or bad.
3.766 bore
3.48 stroke
1.84 int valve
1.5 ex valve
5.7 rod
56 cc heads
8 cc d cup pistons
.015 steel head gaskett
deck height .025
single plane eddybrock
600 cfm 1406 eddybrock
rams horns
xe 262h cam .050 218int/224 ex
intake valve closes at 57 abdc
462 int lift/469 ex lift
rhodes lifters which bleed off 10 degrees of duration and .060 of lift untill 2500 to 3000 rpm
HEI distributor with module and coil upgrade
electric fan
electric fuel pump
straight up timing
approx 9.4:1 static compression
approx 8.4:1 dynamic compression
Thnx for any desktop dyno numbers or any comments!!!
My hope was to get 275 hp and not have to mess with the motor all the time for a weekend cruiser.I am just about ready to fire it up and would like an estimate on hp numbers soo when the first thing everyone asks is how much hp!!!I can tell them a realistic number and I am curious myself since I will probably never have it dynoed.