The bottom end isn't worn out, if you would read correctly you would see that I have a brand new cast crank, and may upgrade to a set of eagle rods with power forged pistons, which I ordered yesterday. I'm leaning towards either the XE 274 ot the Lunati Voodoo cam, Tech as it happens I do have a set of heads in my garage that are 64 cc's, I will get the numbers for you today and see if you think those would be ok with a valve job and a good port, polish. I acually have 4 or 5 differant sets of heads but only one set is a small chamber set, the others are 400 heads and the 993's.
If I get to the correct compresion, which cam do you think will pull the hardest, the voodoo or the comp xe, sorry for being stuck on those 2 cam choices, but I guess I am har headed, but I am willing to do whatever I need for the engine to operate correctly with one of the 2 cams, gonna have about 3 or 4 months to finish the engine, so I'm not in a hurry, and I'm sure I'll learn a lot more in that time. Thanks