AFR website

Printable View

12-18-2006, 04:09 AM
S&S62biscayne

AFR website

Has any one looked at the Air Flow Research website.
One of there dyno figures shows 465hp with 180cc heads, 9:1 comp,
.480 lift flat tappet hydraulic 230 @ .050. .
Not sure but that seems alot of power for this combo or is it just me.
Any thoughts please.
I build engines for a living. The last 383 i done had 195 AFR CNC ported heads, 10:5:1, 507/510 lift hydraulic cam thats what he wanted i reccomended something around .550 lift with the comp it had. air gap , BG Mighty demon, balanced thats why i raise this question of 465hp
It only made 420 hp at 5800
12-18-2006, 05:06 AM
Dave Severson

I've never used any of AFR"S heads except the Ford twisted wedge and matching intake.... Built a 408 Windsor stroker, my dyno results on 3 passes were within 5% of what AFR said it would be..... Guess I'd go with their recomendations on a Chevy too... They've got the R&D time and the dyno results to back it up......
12-18-2006, 06:44 PM
erik erikson

Quote:

Originally Posted by S&S62biscayne

Has any one looked at the Air Flow Research website.
One of there dyno figures shows 465hp with 180cc heads, 9:1 comp,
.480 lift flat tappet hydraulic 230 @ .050. .
Not sure but that seems alot of power for this combo or is it just me.
Any thoughts please.
I build engines for a living. The last 383 i done had 195 AFR CNC ported heads, 10:5:1, 507/510 lift hydraulic cam thats what he wanted i reccomended something around .550 lift with the comp it had. air gap , BG Mighty demon, balanced thats why i raise this question of 465hp
It only made 420 hp at 5800

What was the duration at .050 of your cam with 507/510 lift?
12-19-2006, 06:44 AM
rumrumm

Quote:

Originally Posted by S&S62biscayne

Has any one looked at the Air Flow Research website.
One of there dyno figures shows 465hp with 180cc heads, 9:1 comp,
.480 lift flat tappet hydraulic 230 @ .050. .
Not sure but that seems alot of power for this combo or is it just me.
Any thoughts please.
I build engines for a living. The last 383 i done had 195 AFR CNC ported heads, 10:5:1, 507/510 lift hydraulic cam thats what he wanted i reccomended something around .550 lift with the comp it had. air gap , BG Mighty demon, balanced thats why i raise this question of 465hp
It only made 420 hp at 5800

I built my 383 using AFR 190 heads, CompCams Magnum 280 cam (it has the specs AFR listed), 10.6:1 static compression, Edelbrock RPM intake with an Edelbrock 750 carb. It was dyno tested on a Staska dyno, and it made 450 hp @5700 rpm and 468 ft. lbs. of torque at 4300 rpm. Given there is up to 5 per cent difference between dynos, I would say that those numbers are correct.