Quote Originally Posted by Dave Severson
Would this be ok with the 700R4 that Van's is setting up? He'd prefer to see me stay in the 400 to 425 horse level.. Maybe just backing off to a vacuum secondary 650 would help with the driveability and make the OD trans live a bit longer???? Got to stick with the mechanical rollers, such cheap horsepower, all things considered.... Gonna go look at the VooDoo specs. I'm sure you (Erik) got a line on just the heads I need?????
Dave,with 400 to 425 hp yo don't need a mech. roller cam.
At this hp level I think you can get it done with a large hyd. or a small mech.
Even a small mech. roller will push you above the 400 level.
Yes,a vac. carb will help out a lot.
At 400 hp you need a 180 cc head to get the job done.