Thread: mild 350 project
Threaded View
-
10-26-2006 04:34 PM #1
mild 350 project
i am wanting to build this 350 i had gotten from my mechanics teacher at school.....he was getting rid of about 8 engines, mostly ford, and i took the one chevy as he had no idea what it was or what condition it was in. got it home and it turns out to be a freshly honed 350 2 bolt block with cast dished pistons, a cast crank and 487 heads with new stock valvesprings/guides and seals with freshly ground valves. i am wanting to get a set of flat top hypereutectic pistons and powdered rods while using the stock crank if i cannot find a steel crank and i want to get an edelbrock performer intake and an edelbrock 600 carb(cost a case of beer from my bro) and finally a hydraulic lunati voodoo cam kit with 454.''/.468'' lift, 213/219 duration @.050 and 112/108 lobe sep./intake centerline. my question is that if this setup will make for power/torque and if it will work well in a g-body car with 3.42-37.3s with th-350 with shift kit and if the cam will work with stock vavle train and if i should get some head porting done to clean up slag and maybe a performance valve job.
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel