Thread: Looking for a little advise........

Tweet

I am getting ready to build my 3rd SBC. I have been acumulating parts for a little while. My last project I couldnt keep together. It was a 350 6 bolt with 400 crank 35 over. Stock internals... Lasted about a year in my 1980 k 10

I just baught a 305 roller motor out of a early 90's Z. What I want to do is do a 400 crank, double hump heads 202 190 valves, and use the 4.3 chiped computer and harness for injection, sbc v8 tb and injection manifold.

What my question is can I use my double hump heads on this block, and do TB injection with these heads? can I do a 400 crank in a 305? i will want to punch it out, How much do I want to go.


The block is fresh.. so I wont have much done besides bored and I figured I would do a balanced rolling assembley from like jegs.... I currently have the doulble hump heads fresh with big valves and hardened seats....
I would like to use the stock roller cam, if possible .


Ahhhhhh I dont know anything I need to know.... I am sorry if I confused anyone as My train of thought confuses myself...
Thanks in advance
Branden Jones