-
Hey fellas I need some heads with 190cc intake runners and 64cc chambers should I invest my money in my stock heads or, Because I want this to be a Edelbrock Performer RPM motor I could get a set of those heads but they dont make a performer rpm head as I want it. What should I do
-
WHy 190 cc if you want an Edelbrock Performer RPM motor? Edelbrock has some pretty smart engineers, and they design their packages to work together.
-
well I went to a site to see some dynoed 383s and found a 503 h/p mtr and they said they used those heads and yeah I know Edelbrock designes their parts to work togeather would it even matter that the mtr didnt get that much air? So they make their parts work togeather does that mean you cant trick them out asn in port and polish, shave, and so on?
-
What it means is that an engine is a system. The parts need to work together. If you take heads that are designed for a certain displacement, camshaft, etc., and start "tricking them out," you're likely to mess up the system.
Question. Have you ever built a motor?
-
ok. and yes I have couple down and a 305, 350 and a 360 to go
-
and convert my other 350 to 383
-
if ur gonna use an edelbrock anything use an RPM air gap and a set of their heads. the air gap gave my car twice the bottom end pull it had with a strip dominator but it aint got twice the top end like the strip" did. i guess thats part of racing do you want more bottom or top end? cant have em both for cheap usually. ill get of my soapbox just thought id ramble for a bit :D ............scooter
-
um I think more bottom to mid