Thread: 350 build up help
Results 1 to 15 of 23
LinkBack URL
About LinkBacksThreaded View
-
08-14-2006 01:04 AM #2
CHR Member/Contributor
- Join Date
- Jun 2004
- Location
- Auckland
- Car Year, Make, Model: 69 Holden HT
- Posts
- 818
Hmmm I can recall a motor, that would suit you that was put out in an article a few years ago. How much do you want to spend on machining and parts ?
They used stock chevy parts a good matched cam to run with the chevy open chamber iron heads, had a broad torque curve and the whole idea was to achieve 1 HP per cubic inch which they did, and the motor was built with the criteria that it run in a street car with good street manners.
Last edited by southerner; 08-14-2006 at 01:08 AM.
"aerodynamics are for people who cant build engines"
Enzo Ferrari
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Can't load on alternate browsers such as Seamonkey, Safari, or Firefox
Back online