Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

View Poll Results: WILL YOU GET MORE HORSE POWER WHEN YOU BORE A ENGINE

Voters
32. You may not vote on this poll
  • YES

    20 62.50%
  • NO

    12 37.50%
Like Tree5Likes

Thread: how much more horse power do you get when you bore a engine.060
          
   
   

Reply To Thread
Page 3 of 4 FirstFirst 1 2 3 4 LastLast
Results 31 to 45 of 47
  1. #31
    1JohnnyO is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Hagaman
    Car Year, Make, Model: 71 Chevelle SS, 67 Camaro
    Posts
    404

    I think the problem with this whole discussion was just the way that the original question was asked. I think it's obvious to all of us that an increase in cubic inches will yield an increase in power. But as mentioned, it wont be anything that will be felt in your 'ass' dyno. After your boring is done, you will do new rings, gaskets, maybe other machine work...other new parts maybe. That's the stuff that will build your power up. I am also one who will take a virgin block and bore it to whatever I decide based on what Im building. I dont worry about having anything left to do it again. If I want to build a specific engine, as I did on my last build, then it requires a certain bore, and certain stroke. If the bore is stock, and I have to go .100 over, then so be it. And increasing the bore diam. will INCREASE c/r, not decrease it...but I think this has already been verified.
    When your dreams turn to dust, Vacuum!

  2. #32
    sparky2263's Avatar
    sparky2263 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Keystone Heights
    Car Year, Make, Model: 65 'vette, 04 GTO, 92 4.3 Blazer
    Posts
    140

    2 ways to go fast. Cubic inches or cubic dollars.

    But having both makes you fastest........

    http://www.cardomain.com/memberpage/647081

  3. #33
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    yes i did build a 100 over big block it took 4 to find one that could go to it that was over20 years ago and it is still out there i have a new donovan bored to the max if the walls can take it do it. i have sleeved the the big bore stuff 4.600 when things go bad to. so it is not the end of the world if you have to sleeve one or two holes
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  4. #34
    billlsbird is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2004
    Location
    Pahrump
    Car Year, Make, Model: '32 Ford 3 Window Coupe w/ 392 Hemi
    Posts
    916

    .....Do yourself a BIG favor & don't over bore your engine any more than necessary! I had my 400 small block bored .060 over to 413 when it didn't need to be overbored at all. I figured "hey if I can get 13 more cubes it'll be 13 more HP".... Well, now my engine needs to be bored & it's maxed out. So I'm having to re-sleave a cylender. Luckily for my it's only one cylender.... It could have been all 8 in which case I'm just scrap the block..... Live & learn huh???? take care, Bill

  5. #35
    gassersrule_196's Avatar
    gassersrule_196 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    Lawrence
    Posts
    3,261

    bigger isnt always better

  6. #36
    BigTruckDriver is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    TX
    Car Year, Make, Model: hotrod
    Posts
    1,830

    Quote Originally Posted by DennyW
    I see some no's up there on the voting. I would like to know why you would not get any more horse power if you bore the engine. Please explain it to me ?
    Well ,I always tought that the piston was also bigger to match compression ratio you had before the bigger bore,but you will get more fuel in the chamber.There also was not a button for a "slight gain".I also think I can say that there is a increase in power ,but you will never feel it on the street.Also if you are using a engine for competition,then every little bit counts so a bigger bore eqauls more cubes.More cubes equal more "power".
    Last edited by BigTruckDriver; 07-13-2006 at 11:51 AM.

  7. #37
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    This discussion needs to focus on the original question which seemed to be about the HP resulting from just an overbore with no other changes. I cannot see how the compression could go down when the swept volume is increased and the combustion chamber remains the same. Since the swept volume increases (slightly) and the compression increases (slightly) the HP should increase (slightly). However this assumes keeping the same type of new pistons, same cam, same ignition, same induction etc. Regarding unnecessary boring, just think how many flathead blocks might be still running but for some overbore which rendered the blocks unuseable after heat cracks? (On the other hand that siamesed double exhaust port in the middle of the block is a design flaw; one that was corrected in the ARDUN heads but don't get me started on that! http://www.oogabooga.ca/oogaboogapag40.htm )

    Don Shillady
    Retired Scientist/teen rodder

  8. #38
    DONNY43's Avatar
    DONNY43 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Bimble
    Car Year, Make, Model: 1985 Chevy S 10 Truck
    Posts
    35

    since i have rebuilt my engine,i cant tell any more h.p with the bore .060.
    but my engine seems to sound more healthy,,,,,,maybe cause the compression ,now is (slight ) more!
    Donny Wagers

  9. #39
    Shrug's Avatar
    Shrug is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Laveen
    Car Year, Make, Model: 1965 Chrysler Newport
    Posts
    44

    I don't think a bored engine will give you much power at all. Now maybe if you got it excited by showing it sexy pictures of girl engines....
    "Better living through reckless experimentation"

  10. #40
    chevydrivin is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    mccomb
    Car Year, Make, Model: 55 belair: 68 Camaro: 69 F100: 51 M37's
    Posts
    287

    Ok, lets see, if I take my 283 ci chevy and bore it .120 to a 302 ci which motor has more power? the 283 or the 302? if you answered 302 then you must get some horsepower out of a bore. Like it was mentioned, will not be enough to feel and should not be done for the heck of it unless you were going ALL OUT!

  11. #41
    mooseye is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2015
    Location
    Clevelnad
    Posts
    4

    my 2 point 195 cents worth, TN sales tax included!

     



    New here and this thread inspired and compelled me to register.

    It is as someone said, the question is flawed. The correct answer can only be yes. The wording of the question, as well as the subject and dimensions given subconsciously demand that the average American wrench bender try to explain why or why not. The fact is and must be, all other factors being equal, (the magic phrase the original poster should have used) increasing displacement must increase power for performance of work. No matter how small, any increase is a yes answer. This is just a fact of nature.

    Just call me mooseye!

  12. #42
    glennsexton's Avatar
    glennsexton is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Tigard
    Car Year, Make, Model: 63 Nova SS
    Posts
    2,572

    Wow - took you eight years to come up with that, eh? Thread's previous post was July 13, 2006. jus sayin..
    "Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil

  13. #43
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Must be one of them there procrastinator fellers....

    .
    NTFDAY likes this.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  14. #44
    mooseye is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2015
    Location
    Clevelnad
    Posts
    4

    Hey, blame it on google and lack of attention to dates. I don't even remember what I was searching for when the thread came up.
    And it would have been difficult for me to come up with that any sooner since I just got in today.
    Have a good one fellas, no troll here but I have been know to procrastinate about putting something off till tomorrow.
    glennsexton likes this.

  15. #45
    mooseye is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2015
    Location
    Clevelnad
    Posts
    4

    Okay, now I remember. I was searching for almost the exact phrase as the title of this thread. The difference is that I wanted to know exactly/as close as possible with the present technology, how much of an increase for a .010 overbore out of a 200cc jug. I first thought maybe there was a chart somewhere that would give some ball park figures. After thinking about it, i'm sure there are way to many variables for such a chart to be viable if it existed. Maybe a general formula? I slept through Algeria.

Reply To Thread
Page 3 of 4 FirstFirst 1 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink