I have a 350 sbc 90blck with 84 heads, it has a lunati .480 lift cam with a edelbrock eps manifold. It did have a performer rpm which was way to big and took alot of my vacumn. Well i was on the road for about 6months came back and it cranked right up, i decided to change the manifold(to the eps) did that i have reset the timing and everything rebuilt carb also! The miss didnt start till after i changed manifolds. I just wanting any info on finding the miss instead of replacing everything peice by peice! It has accel wires and coil on it and rotor which are all about a year old! Platinum plugs also about a year old!

This is a cool website, wish i had found it long time ago!
Thanks for any help in advance!
Godzirra