Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Motor talk
          
   
   

Reply To Thread
Results 1 to 1 of 1

Hybrid View

  1. 06-18-2006 04:32 PM #1
    1bad75vette
    1bad75vette is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    Huntsville
    Posts
    18

    Motor talk

     



    need a little input on my motor. the cam is already installed so this would be a topend budget build here is the setup

    The setup would be
    Vortec heads upgraded 550 lift
    edelbrock rpm cam 234/244 @050 488/510 lift
    rpm air gap intake
    670 holley street avenger
    attached is the pic of the bottom end i was told on the forum here depending on what head gasket i go with it should be about 9.5 to9.7 compression
    Attached Images
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink