i have a vibration in body the motor was pulled from a automatic and put in a stisk is thera a difference in the belence of flywheel to engine it is a chevy 350 help
Printable View
i have a vibration in body the motor was pulled from a automatic and put in a stisk is thera a difference in the belence of flywheel to engine it is a chevy 350 help
the fly wheel is a stick 350 chevy?
The motor is a 350? what motor did the auto trans come off of.
the motor came from a automatic an put in stick since then i have a vibration
did you put a "pilot bushing" in the back of the crankshaft? for the trans. input shaft. :confused:
What size motor off the automatic?
on some GM motors you had to put a brass bushing in the back of the crank
so the tranmission shaft fits tight,takes place where the torque converter
goes into the crank.....
sorry !! lt1s10 didn't mean walk on your thread,
it has a brandnew pilot bushing
no problem, i bet he forgot to put the bushing in and that will make it vibrate. :CRY:
is the transmission old or new, rebuilt.... could be a bad input shaft, check your motor mounts for loose bolts, check the transmission mount.... if its got a new bushing then that rules that out.... is your flywheel new or a used one that wasn't resurfaced? are the bellhousing bolts tightened all the way.... check all the little things