stock bore 400
Steel crank
stock rods
ported and polished 202 heads
TRW 8 to 1 comp pistons
comp cams high energy 268H
BDS 671 7 lbs boost
two 500 CFM carbs
Check out the pictures of my 33 in the photo gallery
Printable View
stock bore 400
Steel crank
stock rods
ported and polished 202 heads
TRW 8 to 1 comp pistons
comp cams high energy 268H
BDS 671 7 lbs boost
two 500 CFM carbs
Check out the pictures of my 33 in the photo gallery
just a guess cause I don't know final comp ratio but heres what dyno 2000 gotQuote:
Originally posted by hcar
stock bore 400
Steel crank
stock rods
ported and polished 202 heads
TRW 8 to 1 comp pistons
comp cams high energy 268H
BDS 671 7 lbs boost
two 500 CFM carbs
You would probably see better overall horsepower and torque figures if you swapped out that 268 Comp Cam for a cam that was more suited for a blower setup.
Hoptup32 is right. You are bleeding off some of your boost with that cam. Get a blower cam and you will gain some hp and torque.
very nice check out my 33 that I'll be changing the engine combo in soon in the picture section
Quote:
Originally Posted by Matt167