Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Break-in Questions
          
   
   

Results 1 to 3 of 3

Threaded View

  1. 02-24-2006 07:23 PM #2
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    use the molly and run at 2000 rpms for 20 minutes make sure it is ready to run. you want it to fire up an run .cranking on it will wipe the cam. the molly helps stop this. make sure the lifters turn free in the block .do not put molly on the sides of the lifters. only on the feet. wipe oil on the side of the lifters . i can not tell you the lash need to know what you have hyd or soild .if hyd it is O lash an 1/2 to 1 of a turn. prime the engine to this helps get oil in the lifters make sure to use a old dist for a primer so you plug the oil galley
    Last edited by pat mccarthy; 02-24-2006 at 07:30 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink