Aight, i've posted on a couple boards about the 283 with 305 heads.. and im basically getting the same type of response.. that the 305 heads are good to up the compression but they don't really breathe...

So, with that in mind i figure i'd find a head and just run dome pistions to up my compression..

so this is what i have so far

283 .040 over
600 cfm holley w/vac secondaries
65 k coil
350 turbo tranny
and stock gears (soon to be 3.73's when i find a cheaper LSD)

I am goin to run hyd cam. and i'll be driving this car on the hwy sometimes...i figure 3.73's are ok since 283's can take rev's not sure if i can go with a higher gear and be streetable

so where am i at.. i want to choose my cam later if my heads are goin to be change..now that this has arrised from other posts...