Cheers Richard.

Ive actually looked at speedmotive before, and their prices are great. However ive found another place (who some one here probably suggested) who are a bit priceyer but looks REAL good quality.

From speed motive i can get a rotating assembly for 600, but with adding the cost of excternal balancing and also the KB pistons it brings it up to 820 or so.

www.gofaststuff.com who you probably know well do an internally balanced package with KB pistons for 900.

spec:
Kit #13055 Eagle SBC 383 Stroker Rotating Assembly, Cast/Steel "INTERNAL" Balance Eagle 3.75 Stroke Crank, Eagle 5.7" Bushed SIR Rods, Keith Black FLAT Top Pistons #KB135 .020, .030, .040, .060 pistons, 11.6:1 w/58 cc heads, 10.9:1 comp w/64 cc heads, 9.6:1 with 76 cc heads, Speed Pro Moly Rings & Clevite Bearings.

for the few extra dollars i think an internally balenced eagle set would be better. what does every one think?

cheers for the link as well... looks like there is no advantage in 6" rods unless im building a high rpm dragster!

as for the block... 1 or 2 piece seal? is all the same price