exhaust manifold spreader?
See there such a tool?
How often is this required?
Printable View
exhaust manifold spreader?
See there such a tool?
How often is this required?
Try Lisle Tool.It is required whenever you work with a warped exhaust manifold.I use to buy them in pairs.They should run you about $ 11 a piece.Quote:
Originally posted by super62sport
exhaust manifold spreader?
See there such a tool?
How often is this required?
Usually ony required when installing warped SBC drop down exhaust manifolds without the reinforcement bar across the top (you can tell it's warped because the bolts won't start.
Of you need one, make your own with a bolt, nut and short piece of pipe. Grind a small notch in the head of the bolt and end of the pipe so it won't spit out when your spreading the manifold. Cost under a buck and as close as your local harware store or junk drawer.