Thread: 64 impala 327 wiring problems
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
11-26-2005 02:30 PM #1
Registered User
- Join Date
- Nov 2005
- Location
- Clarkston
- Car Year, Make, Model: 1958 corvette
- Posts
- 1
64 impala 327 wiring problems
I have a 64 impala supersport with a 327 - all stock. I recently put an aluminum intake and afb on it. when I put the coil back on, I thought I wired it correctly, just like it was previously; however, I do not have any spark. I know it must be a basic problem, but I don't know where to look. Anyone willing to help with a basic question on ignitions?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-26-2005 02:45 PM #2
CHR Member
- Join Date
- Nov 2005
- Location
- AuSable Forks
- Car Year, Make, Model: 1931 Plymouth Coupe
- Posts
- 32
The wire from the balast resistor goes to the positive lug on the coil,the distributor wire goes to the negetive lug on the coil.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance