progress on 350 project

hey guys whats up, today i did some more wrenching on my engine. its getting pretty close to be yanked out, all i have left is one exhaust manifold, cross member motor mounts and 2 connecting bolts to the engine to the tranny and its out. i couldnt believe what this guy did, on the exhaust manifold, the guy used double threaded bolts to mount them on! like half of the thread in the block and the other half sticking out with a nut wrenched on, instead of a 9/16 bolt! and they were 1/2 inch, not 9/16 like the others. this guy just slapped it together like it was nothing, freakin idiot. today i pulled out the drive line, intake manifold with the carb attached, and pulled out tranny bolts. so sunday out comes the tranny and the old engine! im gonna have the tranny checked, and im gonna power wash the old block, and sell it to intex. then clean all of the gunk under the chassis, yuck, its really bad but oh well.