Blower boost? + Engine dyno guessing?
Hello.
Im wanting to see if anyone wants to take a stab at my horsepower n tourque numbers for my blown sbc.
350, 030 over=355ci
Steel crank n rods
Speed pro blower pistons = 8.1 comp ratio
465-488 X 270-280 - 224@50 and 114 lobe seperation cam
msd ignition
Weiand 6-71 blower
2 Edelbrock 500cfm carbs
Edelbrock performer rpm heads W/2.02 X 1.60 valves 170cc runners
Running 9lbs of boost.
Next.
Im running 8.1 comp ratio and my pulleys now are for 11-12 lbs of boost. Think even with my Alluminum heads that the boost will be to hi for pump gas? Thats why Im planning on 9lbs. Tnx, Hg
Re: Blower boost? + Engine dyno guessing?
Quote:
Originally posted by hemmigremmie
Hello.
Im wanting to see if anyone wants to take a stab at my horsepower n tourque numbers for my blown sbc.
350, 030 over=355ci
Steel crank n rods
Speed pro blower pistons = 8.1 comp ratio
465-488 X 270-280 - 224@50 and 114 lobe seperation cam
msd ignition
Weiand 6-71 blower
2 Edelbrock 500cfm carbs
Edelbrock performer rpm heads W/2.02 X 1.60 valves 170cc runners
Running 9lbs of boost.
Next.
Im running 8.1 comp ratio and my pulleys now are for 11-12 lbs of boost. Think even with my Alluminum heads that the boost will be to hi for pump gas? Thats why Im planning on 9lbs. Tnx, Hg
O.K.,THIS WILL REALLY START SOMETHING.THERE REALLY ARE A LOT OF VARIBLES HERE.TIMING,CAM TIMING,JETTING ETC.ON A GOOD TUNE 450 TO 475.PEOPLE ALWAYS SAID I WAS A BIT OF A CONSERVITIVE.
