Hey folks was wondering if someone can help me out? My 327 is not running right,this is a fresh motor and was running great at initial start up,but now it's fouling plugs for some reason. has holly 650 double pumper, bored .30 over with 64cc heads, the car ran great at first but started running rich, pulled the splitfire plugs and most of them were soaked ,so it was not running on all 8,the distributor is an accell dual point with a pertronix electronic conversion.I was wondering since the plugs were set up for a points system if the spark isn't hot enough to fire all the fuel?? was wondering what you guys might use for plugs or any recommendations for a fix?

Regards,
Terry