Want to build a BLOWN & SPRAYED 383. NEED HELP!!

Printable View

11-14-2005, 07:51 PM
SvtHarry

Want to build a BLOWN & SPRAYED 383. NEED HELP!!

Ok this is what I have : 4 bolt block, camel hump heads,870 street avenger carb, 142 weiand blower and everything I need to have it put on.

Now I was wondering what kind of pistons, rods, crank, cam, ect I should run in it. I want to spray 100 shot of nitrous (nx kit). Where do i start? This will be droped in a 77 camaro with a turbo 400 tranny with manual valve body, 3500 stall, and a 10 bolt 8.5 rearend what gears should i run on the rearend?. This car will be driven in town fri and sat nights only and will be taken to the track every now and then. No highway driving or daily driven.
11-14-2005, 09:29 PM
techinspector1

I was just reading another thread on the subject except for the blower and here is a response from botlfed....

I'm new to the forums, but I was reading some of the messages. I have a 78 Buick Regal with a 388 Stroker, has 10.5.1 forged Pistons, forged Scat Crank. Polished inside of Lifter Valley, Windage Tray, has a 555 Lift Solid Cam with 260 Duration at 0.50. Has a high-rise Intake,750 Double Pumper with a Dual Cheater System (250 Shot). Has a 2 Speed PG Tranny with Tranny Brake. 389 Gears, Runs 11.14 @119.02
11-15-2005, 09:12 AM
erik erikson

Re: Want to build a BLOWN & SPRAYED 383. NEED HELP!!

Quote:

Originally posted by SvtHarry
Ok this is what I have : 4 bolt block, camel hump heads,870 street avenger carb, 142 weiand blower and everything I need to have it put on.

Now I was wondering what kind of pistons, rods, crank, cam, ect I should run in it. I want to spray 100 shot of nitrous (nx kit). Where do i start? This will be droped in a 77 camaro with a turbo 400 tranny with manual valve body, 3500 stall, and a 10 bolt 8.5 rearend what gears should i run on the rearend?. This car will be driven in town fri and sat nights only and will be taken to the track every now and then. No highway driving or daily driven.

THAT IS A VERY SMALL BLOWER.THE PROBLEM IS YOU WOULD HAVE TO SPIN IT VERY FAST TO MAKE ANY BOOST AND THAT WILL REALLY BEAT THE AIR AND MAKE A HOT FUEL AND AIR CHARGE.THE N2o COULD BE USED TO COOL THE CHARGE.MAYBE TRY A 75 SHOT INSTEAD.
11-15-2005, 09:34 AM
TravisB

I wouldn't even use the blower.....just build a bullet proof nitrous motor and call it done! 383/250 shot should be an easy 600fwhp....enought to grenade the 10 bolt!