Hey guys Got a ? about my .030, 9.0:1 c/r, 350sbc, it also has KB120 hyper flats, with moly rings, and are .010 in the hole. A set of World S/R torquers, on .028 GMPerformance head gaskets, which yelds a .038 qwench. The cam i went with is a Retro-Roller (EX270HR) from Comp, with a (.495in - .502ex)(218in - 224ex @50)(110 L/S), plus the cam has (61 deg's) of intake closing ABDC. I dialed the cam in the way that Comp recamended me to, and the runs great. I did a compression check, and found that i have about 150psi at all 8 cylinders. The motor is not broke in yet, and was wondering if 150psi is a little low, or will it get better after the motor gets broken in. (Please Advise)