You should have enough compression to run that cam, it is really lopey, might not be good for a street car, it ain't gonna idle well or have functioning power brakes ( not enough vac to run the power booster ). your going to run in the need for higher gears and a 2,500 stall converter at least if you want it to pull itself out of the hole, otherwise it will be doggy out of the hole. I'd recomend CRN-113802 which is a cam operates in 2,500-5,500 range 222*/234* .467"/.494" it is a crane powermax cam, that is a Summit number. the 1.6 rockers are going to make the cam slightly hotter. the lifters will help make it slightly smaller but not much at all.