383 stroker ...Need info

Printable View

10-17-2005, 07:06 PM
Sixty6

383 stroker ...Need info

I am assembling a 383 stroker kit. someone told me with a 383 you needed a windage tray in your oil pan so the oil can fall back into your oil pan with out having the crank pull it right back around. Though i dont have a high volumer oil pump so it isnt going to be sucking up really fast. Anyone have an answer?
10-17-2005, 08:00 PM
erik erikson

Re: 383 stroker ...Need info

Quote:

Originally posted by Sixty6
I am assembling a 383 stroker kit. someone told me with a 383 you needed a windage tray in your oil pan so the oil can fall back into your oil pan with out having the crank pull it right back around. Though i dont have a high volumer oil pump so it isnt going to be sucking up really fast. Anyone have an answer?

It really depends on the application,oil pan,r.p.m.s.It really has nothing to do with the stroke of the crank.
10-17-2005, 11:09 PM
techinspector1

A windage tray is not a necessity on any motor except a thoroughbred racing motor, but it sure helps to control the oil in a hi-perf street motor. Constructing a close-fitting crank scraper will help too.
10-18-2005, 01:21 PM
Sixty6

383

SO NOT NECISSARY FOR MY MOTOR? nOT LIKE IM GOING TO BE REVING 6000 ALL THE TIME. i HAVE A STOCK OIL PAN FOR A 350 AND A STD. OIL PUMP. IT PROBABLY WILL NOT SEE THOSE RPM'S ANYWAYS. THANKS FOR THE INFO.
IAN
10-18-2005, 08:16 PM
erik erikson

Re: 383

Quote:

Originally posted by Sixty6
SO NOT NECISSARY FOR MY MOTOR? nOT LIKE IM GOING TO BE REVING 6000 ALL THE TIME. i HAVE A STOCK OIL PAN FOR A 350 AND A STD. OIL PUMP. IT PROBABLY WILL NOT SEE THOSE RPM'S ANYWAYS. THANKS FOR THE INFO.
IAN

I would check the pan very carefully.Some of the 350 pans will not work because of the larger counter weight of the 3.75 stroke.It will hit the pan in a couple different places.
11-14-2005, 08:02 PM
botlfed

1 Attachment(s)

388 stroker

I'm new to the forums, but I was reading some of the messages. I have a 78 Buick Regal with a 388 Stroker, has 10.5.1 forged Pistons, forged Scat Crank. Polished inside of Lifter Valley, Windage Tray, has a 555 Lift Solid Cam with 260 Duration at 0.50. Has a high-rise Intake,750 Double Pumper with a Dual Cheater System (250 Shot). Has a 2 Speed PG Tranny with Tranny Brake. 389 Gears, Runs 11.14 @119.02
11-14-2005, 09:15 PM
techinspector1

Can't argue with that. :)
11-15-2005, 05:41 AM
acechev55

383

I have a 383 in my 55 Chevy for two years. I run this on the street all the time, not at the strip. Dose not have a oil windage tray in it. It has a 525 lift hgd roller cam with roller rockers and took care of the head with guide plates, screw in studs. I run it up to 6500 rpm.

Hope this helps.

Terry