Oil pan worked ,we just used the radiator out of the z28 and made brackets
Printable View
Oil pan worked ,we just used the radiator out of the z28 and made brackets
Hedman makes a set of lt1 headers for chevelles
PICTURES! WE WANT PICTURES!
click on the camera by my name ,I have a few pics there
Nice fit. Nice and low in the engine compartment. I think that would be a nice fuel system in my old vette. Question? I notice the center bolt valve covers, does that mean you are using the Vortec heads on the car? If so, I assume you running the Scoggins Dickey intake for TPI?
The whole setup came from a thrashed 95 Z28 its stock Lt1 aluminum heads ,I had the engine stroked to 383 then had the computer programmed to use MAP sensor so I didnt need the MAF and piping we took it on a trip last summer and got 25mpg
nice! i see you painted all of that alum. i wish i had. :cool:Quote:
Originally posted by 75mbsl
The whole setup came from a thrashed 95 Z28 its stock Lt1 aluminum heads ,I had the engine stroked to 383 then had the computer programmed to use MAP sensor so I didnt need the MAF and piping we took it on a trip last summer and got 25mpg
I'll post more pictures next week ,the only thing if I do it again ,you can see the room to move the engine back 2 inches ,I may do that some day ,and the stock z28 radiator looks kinda crappy ,I am gonna get a custom one made when and if this one goes bad and we had to drill holes in the smoothed firewall for Vintage air ,shoulda ran them out the bottom