305 needs help

I am new to rods and am building a 91 chev caprice for my first.

I have the 305 with 207000 mi on it

I want to keep the 305 but also want to pull more power out of it

any ideas????

Tell me in 1,000 words or less exactly why you want to keep the 305.

$$$$

i am on a tight budget ( $900 ) and have little experience in rods

also this is daily driver

i have a 305 too. if i come across a 350 im taking it, i advise you to do the same. i think holley makes a better quadrajet carberator, that is an easy economic way to improve acceleration. it should bolt right in place of your fuel injector. by the way maybe someone can help me...my stock carb is like 500 cfm i think, if i replace it with a holley should i get like 600?

with a budget of $900, you can easily have a 350 built and running...they are very cheap because they are very common.

I was doing some checking on the net and am finding that the 350 will bolt great to the existing 305 setup within the car now

My dad has a 383 built up from a 350 block and is offering it to me for 450 which is a hell of a price

however

what chip will i need to use?
engine mounts?
will the ac brackets fit up?
will the tbi fit and work?
should i stay with the performer edlebrock that he alredy has on it?
go with a tripple core radiator?
wireing harnesses on the new motor?
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11

well the police caprices came with 350's. the mounts are probably the same and stuff, try looking up specs on the police package caprices.

if it has a 305 then the 350 block will fit...they are the same on the outside...

the 305 tbi will starve a 383...

Leave the intake on the motor, its a good one....go carburated.

would the tbi still starv the 383 with larger injectors?
say like 454 or 350?

the system from a 350 will work good.

Ok after doing some research, i decided to stay with a 305 for money reasons....

what i need to know is, what modification would be sugjested for my engine....

Keeping the TBI setup what brands would people here sugjest?

Id suggest the same thing that everyone should do that wants to pep their motor...

heads, intake, cam, headers, and fuel source.

If u must stay with the TBI then get a bigger one. Holley sells a factory replacement 5.7L TBI system that works on the hopped up 5.0L. I think...If someone else could confirm that would be a much better statement.

what if i am wanting to NOT pull the motor?

Since I dont have a cherry picker, or engine stand, what top end performance upgrades can I do?

Without using giggle juice
:toocool:

with 207,000 miles on it..I wouldnt bother spending money on the engine itself, Id spend it on an exhaust & ignition upgrade.