Thread: Marine cam
Results 1 to 9 of 9
Threaded View
-
07-13-2005 08:16 PM #9
rancheroxl, You are exactly right ! Mercruiser designs their outdrives to turn a max of 5200 rpms.Originally posted by rancheroxl
imho, boats need more low end torque. usually 4-5 grand and they are all in. That way, they can run wot - or closer to it - for longer periods than you can on the street. I seem to always have quite a few boats, they just don't run!
Lets say you are dealing with a 22 to 26 foot V- hull boat. Trying to get that beast on plane is like trying to pull an elephant on water skis. You need all the grunt you can get, Therefore you need plenty of torque from just off idle.Some of these boats will turn 6 grand,but not many. Even if they will ,they have to have the bottom end power or they're dead in the water.





LinkBack URL
About LinkBacks
Reply With Quote
Can't load on alternate browsers such as Seamonkey, Safari, or Firefox
Back online