SBC Heads???

Looking for all the HEAD Experts!
I have a sweet 1980, 350 chevy engine that was built to pull a 1980 P-30 Step Van - Tool truck, Motor Home.
I am changing a few things on this engine. I have 2.02 hump back heads I am adding.
Question:

Will the stock Fuel Injection Manifold off a 1990, 350 Chevy PU fit these older style heads ? Did chevy do some weird to the heads and intakes when they added the EFI? Or did they just add the EFI. I am going to up grade from the stock EFI when $ become Available. But trying to use the stock EFI thats on my 1990 Pickup


Thanks in advance

B'2

:confused:

From what I've learned so far on my engine buildup the heads should work just fine on you block. But the manifold isn't going to just bolt right on. It doesn't have anything to do with the EFI, it's just that the 4 central bolts don't line up. And as I have been asking around, it's just easier to buy a new manifold that you know will fit.

Not only won't the intake bolt to the heads, don't forget that those heads don't have any accessory bolt holes.

Ok I got this kick butt 350, with 202 heads, what manifold do I use to put the stock EFI system back on? I really want to run these 202 heads.

Help! :whacked: