Here is my set up with part #s hope it helps you. DH

327 Chevrolet 1964

Block; 327 Chevy Bored 4.030 GM# 3782870

Intake manifold; Edelbrock p/n 2101 Performer 0 to 5500 rpm

Carburetor: Edelbrock 600cfm 4 Barrel manual choke Part# E-1405

Pistons; Speed Pro, Forged steel. p/n L2165F (Fast engine parts) 5/64, 5/64, 3/16- Compression, 11.2 to 1

Heads; Chevy 60cc Chamber (witches Hat) #3795896

Oil Pump; Melling standard flow.

Camshaft; Edelbrock Performer Plus Series. .442 lift, slightly rough idle. Matching lifters p/n 2102

Crankshaft; Stock crank GM # 3782680 Machined .020

Timing; Edelbrock accu-drive (gear drive) p/n 7890

Valve springs; Edelbrock dyno matched with guides. P/n 5802

Valves; PEP Racing products Stainless one piece hardened tip. Head size 1.720 stem size 3/8

Gaskets; Felpro performance (Full engine set) P/n2802 (fep)

Pushrods; GM Hardened (thick wall) 7.75"
Rockers; Standard GM
Connecting rods; GM 5.7"
Bearings; Clevite 77 “P” series. Mains and rods

Headers Patriot, tri five series, ceramic coated.