Yes,now we are on the same page of paper.Quote:
Originally Posted by gassersrule_196
Printable View
Yes,now we are on the same page of paper.Quote:
Originally Posted by gassersrule_196
i used to work at a bodyshop the guy who ran it his dad used to run a jr fueler in socal in the 60's great stories thats for sure.
:EEK: :EEK: wow we agreed again i dunno if my heart can take this :LOL:
May our trend continue on.L.O.L.Quote:
Originally Posted by gassersrule_196
:LOL: yeah i guess?
WE CAN DO IT!!:whacked: :whacked:Quote:
Originally Posted by gassersrule_196
:LOL: so anyway what is a good aftermarket head you would recomend for a 12:5-1 302 chevy? dome pistons .500 .300 <single profile> cam with an rpm air gap? 4:88 gears 10 inch 3500 stall <thought this info would make it a little easier>
It really depends on your budget.Quote:
Originally Posted by gassersrule_196
I would try a set of 180 cc Aluminum imported heads that are CNC ported.
The CNC heads sell for around $1,200.
That would be loaded up with 2.02/1.6 valves,Crane springs good to .550 lift,7* degree H.D. keepers,7* steel retainers,Teflon seals,5/16ths guide plates,3/8ths studs.
If you want to get buy cheaper order a bare set of the Dart Iron Eagle S/S heads.
Do a lot of bowl work yourself, do work around the valve guide etc,polish the combustion chamber.
Load the heads up with 2.02/1.6 valves same valves springs locks and retainers etc.listed above.
You should be able to get them done for around $750 if you do a lot of the port work yourself.
I have gotten over 450 hp with the mods. done to the Dart heads above on a 383 using a mech. cam and flat top pistons.
i aint never done a set of heads :LOL:
Ya know what??? The BDS converted Hillborn's on that mouse motor with the right heads and roller cam would be down right awesome!!!!!!!!Quote:
Originally Posted by gassersrule_196
yeah dave if i had the $ id have one of those injection setups but ya know racing aint cheap.
Your problem is extremely apparant to me and I'm sure many others here at CHR..... What you need is a rich girlfriend who likes drag racing, then it'll all be easy!!!!!!:LOL: :LOL: :LOL:Quote:
Originally Posted by gassersrule_196
PS----If you find one, let me know if she has a sister!!!!!!!
Quote:
Originally Posted by Dave Severson
:LOL: :LOL:
do you know what power steering brackets to use with a 1966 el camino 283 with headers? I am having problems trying to figure out which of the many brackets I have will line up the best. thanks
Yeah,,,but Scooter just make sure she's fat 'n' ugly or half of us on here will try and steal her from you :LOL: :LOL: :LOL:Quote:
Originally Posted by Dave Severson