Roller Cams

What suggestion would you give for a 383 stroker, 5.7 rods balanced, Holly 600 cfm 4150, 700r4 trans with a 2400 stall in a 71 GMC short bed. I'm looking for a real rough idle, not worried about vaccum.

This is what I'm thinking.

Engine 1955-1998 Chevrolet
262ci-400ci
8cyl.
Grind Number CS 286H-R10
Description

--------------------------------------------------------------------------------

Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.56 0.56
Duration At 0.006 Tappet Lift 286 286

--------------------------------------------------------------------------------

Valve Timing At 0.006
Open Close
Intake 37 69
Exhaust 77 29

--------------------------------------------------------------------------------

These Specs Are For The Cam Installed At 106 Intake CL
Intake Exhaust
Duration At 0.05 230 230
Lobe Lift 0.3735 0.3735
Lobe Separation 110

Kodiak

Your best bet will be to determine your exact static compression ratio and call the cam grinder for a recommendation.

You're gonna need more carburetor.