Ok, had two games of little league for the kids now I can play. I took her up and pulled the bottom flywheel cover. The starter was not engaged all the time and I saw no visable worn, scratch marks etc. on anything. Looked the same when I put it in. The throwout bearing is in right. Whew! The flimsy piece of metal that goes on the bottom engine facing side of the flywheel is shaking like a banshie making the noise. It looks like something is hitting it as the flywheel turns. The metal cover looks straight and all of the screws are in. I'm pulling the starter and am going to try to see what is hitting it. Any ideas as to what would hit it? What did I put together wrong? Lt1s10- I have the proper gap on the linkage...I'd like to say that I did it that way on purpose but....
The noise changes witht he RPM's, something is hitting on the front metal sheet. I'll check the metal first then....