Where to put the oilpressure sensor?

[Bo Jakobsen]

Hi,
Im building a Cobra replica and have purchased a crate Chevy 350. But cant find a spot to put a oilpressure sender?
Probably many out there whos knows :-)

[Mike P]

There's a 1/8 NPT hole located to the right of the distributor hole.

[Henry Rifle]

Mike,

Isn't there also a 1/4" NPT hole right above the oil filter?

[Mike P]

Yep (I usually forget about that one).

[Bo Jakobsen]

Tnx for the info.. Missed the little one on top was looking on side of engine..
Here is a link to my hompage with building of the cobra

http://www.roadster.se/Cobrabygge/C050205.html

[Henry Rifle]

Originally posted by Mike P
Yep (I usually forget about that one).

I usually use the one above the oil filter to get the sender and all the plumbing out of sight.

[30coupe]

A little help Henery - I have a sbc & I'm running Cyberdyne digital gauges. I'm up I canada on the west coast & I am trying to find a replacment oil sender that will work with the gauge. So far I have found out that the gauge works on 0- 90 ohmes ??? Was given a gm part #14040816 but gm say's the # is no good. I would go to Summit but with shipping # exchange it will cost about $100. to get it here.

[Henry Rifle]

Sorry, no help here. I use Auto Meter or VDO gauges. Not much into digitals. I like the old pointers.