well the engine bearings were wiped..... have since sent it a machinist to have everything checked. Got a new crank cut .10 .10 and new set of bearings all around. Re honed the cylinders, got a high volume pump and a new pick. Had the machinist pess in the pick up. New rings as well............................

only thing that sux is that the gasket kit i purchased came with a ripped gasket for the rear main seal plate. what difference would it make if I installed that gasket with permatex or gasket glue??????????

the prob was the oip pum was sucking air $10 part wiped out my bearings......... plus I ordered a new set of crane lifters

thanx for all your help
Kenny